The kit is assembled:

• A black powder-coated 3mm aluminum plate with preformed holes for Ecoflow station feet, and a system for centering the plate on the trailer.
• Aluminium plate screws (4 screws/nuts/washers)
• Velcro-type tightening strap
• External cable with Anderson connector (panel side) and angled XLR connector (trailer side)
• XLR internal cable with trailer-mounted plate (plus screws) and XT60 connector for Ecoflow connection

Please note: Does not include the Ecoflow River2 station – To be purchased separately from their website or other retailers.

NB: When the kit is not ordered at the same time as the trailer (i.e. as a retrofit), a 24mm hole easily made with a hole saw must be cut in the hull to allow the XLR plug to be screwed in.

L’article KERN Ecoflow Kit est apparu en premier sur SolarMoov.

Front bar: L 38.6cm / Width: 7cm / Thickness: 4mm

Back bar: L 36.5cm / Width: 7cm / Thickness: 4mm

Weight: 630grs with screws

Download installation and operating instructions

L’article Roof bars for Kern trailers est apparu en premier sur SolarMoov.

Suitable for mounting a 20mmx40mm aluminum profile frame (not supplied), enabling a flexible solar panel to be attached.

Kit includes:

• Black fastenings (front and rear) to the KERN trailer hull
• U-shaped brackets for +/- 45° rotation and fastening to the aluminum profile frame
• 2 quick-release handles to lock the panel in a defined position between -45 and +45 degrees.
• Miscellaneous screws and bolts

Size per fastener 122x107x43. Total kit weight: 670g

Download installation and operating instructions

L’article Basic mounting kit for tiltable solar panel installation on KERN trailer est apparu en premier sur SolarMoov.

20mm-diameter tube in hot-extruded 25CD4S reinforced steel (used in aeronautics and motorsports)

Aluminum reinforcement plate inside the trailer

Width of support leg 390mm (at end of legs). Height 245mm. Total weight with screws: 830g

Allows the bike/trailer combination to be positioned on the stand without using the bike stand. This method is best suited to securing the bike/trailer combination when there is weight in the trailer and/or bike panniers.

Download installation and operating instructions

L’article Double stand for Kern trailer est apparu en premier sur SolarMoov.

Kit includes:

• A 12mm-diameter aluminum axle body, 197.5mm overall length with 20mm thread length. Choose your thread pitch variant. 3 variants are available: 1mm / 1.5mm / 1.75mm. Remove the thru axle from your rear wheel and check the indication usually engraved on the axle.
• 6 aluminum flat washers with different thicknesses (1, 2 , 3, 6, 8, 12 mm)
• 1 4mm-thick aluminium conical adjustment washer
• 1 nickel-plated steel flat nut for greater strength when screwing. 15 mm wrench for tightening (wrench not included in kit)
• total weight with all washers: 100gr

L’article 12mm through axle kit for mounting KERN trailer on bicycle rear wheel est apparu en premier sur SolarMoov.

Two types of bike attachment available (choose when ordering):

1. By a drawbar that attaches to the cycle’s rear wheel axle. The standard bracket is supplied with a 5mm diameter through bolt which must be replaced by the original standard quick-release bolt. If your axle is not fitted with a standard quick-release axle, please consult the store to choose the right option for your bike. Two types of screwing are possible, depending on requirements: with tamper-proof screw or with tool-free clamping handle (both types included).
2. With a drawbar that attaches to the cycle’s seatpost. Three sizes are available to choose from when ordering, corresponding to the majority of commercially available rods: 27.2mm, 30.9mm, 31.6mm.

Both drawbars can be ordered separately if you wish to adapt the trailer to both types of hitch (interchangeable in just a few minutes).

A quality 20″ wheel. Two types of wheels are available (choose when ordering):

1. 20″ magnesium spoke wheel, quick-release hub, disc brake mountable
2. Remerx 20″ double-wall aluminum spoked wheel with eyelets (can be motorized), suitable for disc brakes

Transformation into a suitcase:small wheels integrated into the trailer and a handle on the front make the trailer easier to transport. The 20″ wheel fits into the trunk with the tire deflated, as does the tiller by ‘wheel axle’.

Several options are available to extend the trailer’s range of uses: roof racks to secure bulky objects / roof racks to secure bulky objects / roof racks to secure bulky objects / roof racks to secure bulky objects A fixing kit to install a tiltable solar panel (the complete kit will be offered at a later date) / USolarMoov safety flag And more options to come

Dimensions excluding drawbar: LxWxH: 1150x470x550mm.

Weight: 9.7kg without wheel axle drawbar option / 11.5kg without seatpost drawbar option

Download installation and operating instructions

L’article Kern multi-purpose bike trailer est apparu en premier sur SolarMoov.

6mm carbon tube in 2 parts (2x50cm) with aluminum junction. Quick, tool-free attachment to trailer. Once folded, the whole unit fits into the trailer’s trunk. Total length 1.05m.

Download installation and operating instructions

L’article SolarMoov reflective flag est apparu en premier sur SolarMoov.